Tea dial nylon thread

Nylon thread is used to suture various clothing materials, and has dual functions of practicality and decoration. The quality of the nylon thread not only affects the sewing effect and processing cost, but also affects the appearance quality of the finished product. Therefore, the general concept of nylon thread formation, the relationship between twist, twist and strength, the classification of sutures, characteristics and main uses, and the selection of nylon thread are introduced to facilitate the establishment of standards for relevant tests. The general concept of nylon thread formation is carding (carding)—a yarn that is only combed and woven at one end.
Combing—The yarn that is combed at both ends of the fiber with a comber, with less impurities and smoother fibers.
Blend—A yarn that is a mixture of two or more fibers of different nature.
Single yarn—formed directly on the spinning frame, will be scattered once it is retracted, referred to as yarn.
Strands --- Two or more yarns are twisted together, referred to as the line.
Sewing thread—the general term for the stitching of sewing products such as clothing.
The new type of spinning – unlike traditional ring spinning, the end is a free end, such as air spinning, friction spinning, etc. The yarns are entangled together and have no twist.
Yarn count --- used to indicate the fineness of the yarn, mainly in the British count, metric count, special number, denier.
Nylon thread is made of nylon yarn. The produced line has certain tensile strength, strong pulling force, luster, high temperature resistance and high speed. It is mainly used for leather sewing, such as: shoes and bags. Industry, sofa industry, etc. Nylon thread is the most common leather sewing thread

Please indicate the source.

Polyester Spun Yarn

WE CAN PRODUCE RING AND OPEN END YARN ACCORDING TO YOUR REQUIREMENTS .

Polyester Spun Yarn,Spun Yarn For Weaving,100% Polyester Spun Yarn,Polyester Spun Yarn For Knitting

JIANGYIN ZHONGXIE NEW MATERIAL CO.,LTD , https://www.zhongxiegroup.com

This entry was posted in on