The first time the new machine arrives at home, please use high and low temperature damp heat test box.

As the saying goes, a good start is equal to half the success. Therefore, if a high-low temperature damp heat test chamber is used for the first time, it will not be easy to fail when it is used. The author will introduce it to you next. Some high-low temperature damp heat test chambers should be noted when using for the first time.

If you don't know about the high and low temperature damp heat test chamber, you may not know that the high and low temperature damp heat test chamber is a very delicate instrument. His delicateness has already started when you bought it from the previous time. . The first is the transportation of high and low temperature damp heat test chamber. During transportation, you must pay attention to the fact that the high and low temperature damp heat test chamber can not be tilted more than 15 degrees. The high and low temperature damp heat test box must be face up in transportation and should not be placed horizontally or inverted. Secondly, it is placed in the position requirements. The high and low temperature damp heat test chamber should be placed in a ventilated place to facilitate heat dissipation, thereby increasing the cooling capacity of the high and low temperature damp heat test chamber. Generally, the distance between the high and low temperature damp heat test chamber and the peripheral wall is not less than 50. cm.

After moving the high and low temperature damp heat test chamber into the test room, the test box at this time basically begins to enter the formal work stage. Next, the author will talk about the small mistakes that should not be made during the use.

1. High and low temperature damp heat test chamber During the test, if there is no special need, please do not open the door to avoid the unstable operation of the equipment and prevent the operator from scalding and frostbite.

2. When the laboratory is frequently powered off or the voltage is unstable, the power supply of the high and low temperature damp heat test chamber must be cut off to prevent frequent start-up and burn out of the compressor.

Multi-functional Suit

Hotel Staff Uniform,Pilot Suit Uniform,Restaurant Manager Uniform Suits,Hotel Restaurant Service Staff Uniform

Shaoxing Xiaotrain Imp.&Exp Co., Ltd , https://www.xiaotrain.com

This entry was posted in on